These hardened steel, single groove Steel Street Locks with 7? lock angle and 11/32" valve stem size are perfect replacement locks for stock engine rebuilds. They are recommended only for street applications with lighter valve spring loads. It is critically important to make sure valve locks match the valve size. There should always be a small gap between the two halves of the lock when they are properly positioned on the valve stem. If the two halves fit together without a gap, they are too large. If the locks fit tight to the stem and leave a gap between the middle of the lock and the O.D. of the stem, the locks are too small.
Designed for milder, street applications, this set of 16, 7 degree lock angle valve locks are stamped then hardened for use with milder spring loads in applications with 11/32" diameter single groove valves.
Valve Lock; Keeper; Retainer Lock; 10 Degree; 7 Degree; Steel Retainer; 1 Groove; Valve Keeper; Valve Keeper Set; Valve Lock Set; Locks
Recommended for street applications with lighter spring pressures; Stamped and hardened for superior wear resistance
Hardened Steel Set of 16 - 7 Degree, 11/32", Single Groove Street Locks
COMP Cams Valve Locks 11/32in Single Gro
Engine Valve Spring Retainer Keeper Kit
Hardened Steel 7 Deg 11/32" 1 Grv Locks
SpringRetainerKeeper
None
