Softride® springs use only American steel and the individual leafs of each spring are shot-peened with hard steel pellets at very high velocities. This shot-peening compresses the surface of the steel thereby increasing the tensile strength of the spring. Without this shot-peening procedure, the maximum wheel travel and ride quality could not be achieved without sacrificing the life of the spring. Softride® springs use bolt style spring clips, eliminating friction. Other spring designs use the cinch style bend clips which bend tightly over the spring leafs causing binding and friction. Skyjacker® Softride® springs taper over the entire length of the leaf creating more flex at the leaf ends. This tapering distributes loads more evenly over a greater area and reduces the tendency for one leaf to dig into the leaf above it. Rear Softride® springs are used to complete the SYSTEM in a Skyjacker® suspension lift.
Softride Leaf Spring System Suspension Lift Kit; 6 in. Lift w/TWGP;
Skyjacker 6"SR 80-96 F250,350 I,W/TWG
6IN.SR 80-96 F250;350 I;W/TWG
LiftKtSusp
